Additions and corrections

Colour selective organic photodetectors utilizing ketocyanine-cored dendrimers

Ross D. Jansen-van Vuuren, Almantas Pivrikas, Ajay K. Pandey and Paul L. Burn

J. Mater. Chem. C, 2013, 1, 3543 (DOI: 10.1039/c3tc30472h ). Amendment published 15th April 2014.

All of the E_1/2 reduction potentials listed in the last column of Table 1 should be negative. A corrected version of Table 1 is shown below

Table 1. Summary of the thermal, photophysical and electrochemical properties of the ketocyanine dyes.

The fourth entry within the column labelled 'J_d (mA/cm^-2) (bias, V)' of Table 2, which currently reads '3.2 x10^-4 (-1)' should read '3.2 x10^-1 (-1)'.

Table 2. Electrical characteristics of photodiodes composed of compounds 1-4 in 1:1 blends (by weight) with PC₆₀BM studied in the device geometry of ITO/PEDOT:PSS/Compound 1-4:PC₆₀BM/Al along with the properties of green-absorbing photododetectors in the literature. The FWHM and λ_max are shown for the photoresponse (EQE with error bar of +/- 0.1%) profile of each photodetector. The dark current; J_d and dynamic range; J_ph/J_d values are provided where known.^a

The authors apologise for this oversight and for any confusion that it may have caused.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.

Back to article